View Cart - (0 Items)
Saturday May 30, 2020 10:50 pm ET.
Home About Us Specials Whats New Links F.A.Q. Contact Us Shopping Cart Request a Quote My Account / Register
Eye Bolt, Shoulder Pattern, Threaded, 9/16"-12 Thread Size, 1-5/8" Shank Length, 3,000 lb. Capacity

Request a Quote


Product Code: 87996
The receiving hole should be counter-sunk and be free and clear of any debris to assure proper seating. LOADS SHOULD ALWAYS BE ALIGNED TO THE PLANE OF THE EYE, not at an angle to the plane. A steel washer or spacer may be used in conjunction with Shoulder Eyebolts to attain proper load alignment. The thickness of the steel washer or spacer must not exceed one thread pitch. Angular lifting should be avoided. Angular lifts significantly reduce rated capacities. See Rated Capacities/Guidelines. Check seating after applying an angular lift since the initial lift may cause the bolt to back away from the load. If such occurs, the Eyebolt should be unloaded & properly reseated. For applications with untapped through-holes, longer length Shoulder Eyebolts are recommended, using a steel washer and nut for the required thread length of engagement. Shoulder Eyebolt tapped holes are to have a threaded length which allows for full length of shank engagement and clearance for the unthreaded portion of shank. Shoulder Eyebolts must be firmly seated and flush against the mating surface; otherwise, the rated capacity is reduced significantly. The use of a steel washer or spacer is permissible and may be required; however, the thickness must not exceed one thread pitch. Plain Eyebolt tapped holes are to be threaded for full length engagement of the Eyebolt. Plain Eyebolts must have full thread shank engagement, allowing for one-half turn for proper eye-alignment to obtain rated capacities.
Ken Forging Machinery Eyebolts are manufactured to ASME B18.15 and tested to ASTM A489 specifications.

SHIPPING TIME: Usually ships 1-2 days

© 2020 Holliston's Inc. All Rights Reserved Website by: Netmosphere Design
About Us | Shipping & Returns | Links | Privacy Policy | Legal | Conditions of Use | Request a Quote | Contact Us